Operation; Power Switch - Compak CUBE TAMP Instruction Manual

8.

OPERATION

8.1.

POWER SWITCH

The power switch (
9
( )
: Equipment on
: Equipment off
8.2. FITTING THE PORTAFILTER
It is essential that the portafilter is perfectly
adjusted to achieve a consistent and level
tamping.
Make sure that the diameter of your
portafilter matches that of your Cube Tamp's
coffee tamp.
To adjust the support height:
Make sure the power switch (
OFF position. Fig.1
Turn the wheel ( ) clockwise to lower the
8
support. Fig 2
Counter-clockwise to raise it.Fig 3
NOTE: The manufacturer reserves
the right to vary the components
of the machine, according to the
requirements of each market, as
well as technological advances.
14
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v 22/12/2020 | K08021H05
) has 2 positions:
)is in the
9
Fig. 1