Where To Use It - Compak CUBE TAMP Instruction Manual

7.3.

WHERE TO USE IT

The appliance must be installed on a
solid, flat surface.
The minimum size of the
workplace, to ensure the best
performance of the device, must be at least
the following:
Height
Width
Depth
ORIGINAL INSTRUCTIONS | Ref.quality process 002/03 | v. 22/12/2020 | K08021H05
mm
280
11.02
in
mm
166
6.53
in
mm
186
7.32
in
7.
INSTALLATION
7.4.
INSTALLATION
Before connecting the machine, check the
following:
• The characteristics on the data plate
match those of the electrical mains
network.
• The electrical connection plug
matches the socket into which it is to
be plugged.
• Ensure that the electrical power of
the facility is adequate for the power
consumed by the appliance.
• The point of connection to the
electrical mains network must
be protected with the appropriate
electrical protection device.
• The equipment must be correctly
connected to a ground connection
according to the current safety
regulations.
13