7.
INSTALLATION
7.1.
LEGAL WARNINGS
The installer must read this instruction
manual carefully before installing the
machine
The installation of the device must be
carried out by qualified and
authorised personnel, in
compliance with the current
safety and hygiene standards.
12
ORIGINAL INSTRUCTIONS | Ref. quality process 002/03 | v 22/12/2020 | K08021H05
7.2.
IMPORTANT WARNINGS
The operator must be a responsible
adult. Never a child nor someone without
the ability to accept that responsibility
When handling the machine, the following
precautions should be obeyed:
•
Feet must not be bare.
•
Hands and feet must be dry.
•
Do not get the machine wet.
•
Do not expose the machine to
direct sunlight or other atmospheric
agents.
•
Never insert any part of the body
between the tamp area and the
support
•
When unplugging the grinder,
always pull on the plug and never
the power cable to avoid a possible
short circuit.
Need help?
Do you have a question about the CUBE TAMP and is the answer not in the manual?