Using A Ps/2 Mouse Simultaneously With Accupoint Ii - Toshiba TE2300 User Manual

148
Expansion Options
Using a mouse

Using a PS/2 mouse simultaneously with AccuPoint II

When you connect a PS/2-compatible mouse to the PS/2 port,
you may use the mouse, the AccuPoint II, or both:
NOTE
1 Click Start, Control Panel, then Printers and Other
Hardware.
2 Click the Toshiba HWSetup icon.
3 Select the Pointing Devices tab.
4 Under Pointing Devices Options, select one:
❖
❖
When connecting any PS/2 device, turn off your computer to
prevent any possible hardware damage.
If you connect a PS/2 mouse to the computer while it is in
Standby mode, you will not be able to use the mouse when
you turn the computer on.
Auto-selected — configures the PS/2 mouse to work
when it is connected at power on, or the AccuPoint II to
work otherwise. Auto-selected is normally the default
option.
Simultaneous — configures both the AccuPoint II mouse
and PS/2 mouse to work with the computer at the same
time. You must reboot the computer for the settings to
take effect.
HINT: When Auto-selected is the default, the computer can not
detect a PS/2 mouse if you connect it after booting the
computer.
This can be changed in Toshiba Hardware Setup.