Table of Contents
Advertisement
Connecting Other External Devices
Connecting the display device
If you're connecting a television or other video display device
to the computer's video-out port, first refer to "Selecting
video cables" below for guidelines on choosing a video cable,
then refer to
on page
If you're connecting an SVGA monitor, skip to
an external monitor or projector" on page
Selecting video cables
To connect a device to the video-out port, you'll need to
purchase a composite video cable. For the best video quality,
always use a properly shielded cable.
Using a poor quality cable may result in a dull or fuzzy
picture, poor color, ghosting, video noise, or loss of video.
Connecting to the video-out (composite) port
NOTE
To connect the device:
1
Connect one end of the video cable to the external video
device.
Refer to the documentation provided with the device for the
location of its video-in port.
"Connecting to the video-out (composite) port"
51.
HINT: Toshiba recommends using a cable no longer than
20 feet (approximately six meters).
Video cables are not included with your computer. To connect
a device to the video-out port, you'll need to purchase a
composite video cable.
51
"Connecting
52.
Advertisement
Table of Contents
