Table of Contents
Advertisement
Going into Standby mode more quickly
In addition, you can put the computer into Standby mode by
either pressing the power button or closing the display panel.
You can also specify an amount of time after which the
computer automatically goes into Standby mode.
To use any of these methods, you first need to enable them in
Toshiba's Power Saver utility.
1
Click Start, Control Panel, then Performance and
Maintenance.
2
Click the Toshiba Power Saver icon.
3
In the Running on batteries area, click the Details button,
then select the System Power Mode tab.
4
Select Standby for the options you want.
❖
When I press the power button
Set this option to Standby to put the computer into
Standby mode when you press the power button.
❖
When I close the lid
Set this option to Standby to put the computer into
Standby mode when you close the display panel.
5
Click Override all Modes with settings here.
6
In the Set to range dialog box, click on one of these
options:
❖
Click DC only to apply the settings only when you are
using battery power.
❖
Click All to apply the settings whether you are using
battery power or outlet power.
7
Click OK.
Learning the Basics
Powering down the computer
109
Advertisement
Table of Contents
