Table of Contents
Advertisement
Selecting video cables
To connect a device to the video-out port, you need to
purchase a video cable (not included with your system). For
the best video quality, always use a properly shielded cable.
HINT: Toshiba recommends using a cable no longer than
20 feet (approximately 6 meters).
Using a poor quality cable may result in a dull or fuzzy
picture, poor color, ghosting, video noise, or loss of video.
Connecting a device to the video-out port
Video cables are not included with your computer. To connect
NOTE
a device to the video-out port, you'll need to purchase a
composite video cable.
1
Connect one end of the video cable to the external video
device.
Refer to the documentation provided with the device for the
location of its television signal-in jack.
2
Connect the other end of the video cable to the video-out
port on the computer.
3
Connect the external device's power cable to a live
electrical outlet.
4
Turn on the external video device.
5
Set the display mode by pressing
the Display Properties settings. For more information,
Expansion Options
Using an external monitor
Fn
155
+
, or by changing
F5
Advertisement
Table of Contents
