Operation - Dometic DM 50NTE Series Installation And Operating Manual

Operation

➤ Remove the door handle (C 3).
➤ Remove the gasket.
➤ Remove the lock cover.
Drilling the holes (fig. b, page 8)
➤ Drill a hole (A 1) with a diameter of 23.6 mm (0.93 in) through the decor (only
DM50NTE D) and the door.
➤ Unscrew the twelve screws (B 1) of the decor frame (B 2) (only DM50NTE D).
➤ Remove the decor frame (only DM50NTE D).
Assembling the lock (fig. c, page 9)
➤ Put the new lock cover (A 1) into place.
➤ Put the decor (B 1) into the decor frame.
➤ Screw (B 2) the decor frame (B 3) onto the door.
➤ Install the door lock (C 1).
➤ Install the lock catch (D 1) in the cabinet.
Assembling the drawer (fig. d, page 9)
➤ Push the gasket (1) on the decor frame (2).
➤ Screw the door handle (4) onto the door.
➤ Push the plugs (3) on the screws of the door handle (4).
➤ Push the drawer into the cabinet.
7 Operation
7.1 Saving energy
• Only open the minibar as often and for as long as necessary.
• Allow warm food to cool down first before placing it in the device to keep cool.
• Avoid unnecessarily low temperature settings.
• For optimal energy consumption, position the shelves and drawers according to
their position on delivery.
• On a regularly basis, make sure the door seal still fits properly.
20
DM50NTE
EN