Table of Contents
Advertisement
c
Plugging in the printer
1. Check the label on the printer to make sure that the voltage
2. Make sure that the printer is turned off. It is off when the
3. Connect the power cord to the AC inlet on the left side of the
4. Plug the other end into a properly grounded electrical outlet.
28
Setting Up the Copy Station
Downloaded from:
Caution:
❏ Do not unplug a device when its power is on.
❏ When unplugging a power cord, grasp it by the plug—not
the cord.
required by the printer matches that of the electrical outlet it
will be plugged into. Also, make sure that you have the correct
power cord for your power source.
(N) side of the power switch on the left side of the printer is
pushed in.
printer.
http://www.usersmanualguide.com/
Advertisement
Table of Contents
