Setting Up The Cabinet - Epson AcuLaser 8600 Setup Manual

Setting Up the Cabinet

Make sure the cabinet box contains all of the parts listed below.
Then follow the steps in this section to assemble the cabinet and
to install the control panel.
Downloaded from:
left frame
left support
caster fixer
cable clips (8)
Large fasteners (3)*
http://www.usersmanualguide.com/
front panel
top panel
joint A joint B
stoppers (2)
Small fasteners (1)*
Setting Up the Cabinet
right frame
right support
panel cover
Miscellaneous
M8 × 35 bolts (8)
M6 × 12 screws (4)
M4 × 10 screws (29)
flat washers (8)
spring washers (8)
spanner
lock pins (2)*
* Not for use with this model.
7