Setting Up The Copy Station - Epson AcuLaser 8600 Setup Manual

Setting Up the Copy Station

Once you have added each device to the cabinet, you are ready to
set up the copy station. This process involves connecting the
interface cables and power cords. Follow the steps in this section.
Connecting Interface Cables
The copy station devices are connected as shown below.
Follow the steps in this section to connect the interface cables.
1. Make sure the printer and scanner are not plugged in.
Downloaded from:
scanner
scanner cable
http://www.usersmanualguide.com/
printer
control panel
control panel cable
Setting Up the Copy Station 25