Table of Contents
Advertisement
1. Plug the shielded control panel cable into the control panel's
2. If you plan to attach the control panel to the cabinet, fasten
12
Setting Up the Cabinet
Downloaded from:
interface connector, located on the bottom of the control
panel.
Note:
As the interface connector head is covered, disconnect the cable by
pressing the spring on the side of the control panel.
the control panel shelf onto the bottom of the control panel
using the screws included with the copy station accessories.
control panel shelf
http://www.usersmanualguide.com/
control panel cable
interface connector
control panel
Advertisement
Table of Contents
