Table of Contents
Advertisement
134
Expansion Options
Using the optional Advanced Port Replicator III
Use the Universal Serial Bus (USB) ports to connect the
optional external USB diskette drive or other USB
peripherals.
You can connect the AC adapter to the DC-IN jack on the
optional Advanced Port Replicator III.
Use the Universal Serial Bus (USB) ports to connect the
optional external USB diskette drive or other USB
peripherals.
Using the optional Advanced Port Replicator III
The optional Advanced Port Replicator III connects to the
expansion port on the bottom of the computer. When the port
replicator is attached and the power is on, a small light
illuminates.
Attaching the optional Advanced Port Replicator III to the
computer
1
Make sure the computer is turned off.
2
Unplug and remove any cables connected to the
computer, including the AC adapter cord/cable.
3
Locate the expansion port on the bottom of the computer.
4
Holding the computer firmly, connect the expansion port
on the bottom of the computer to the connection port on
top of the optional Advanced Port Replicator III by
pressing straight down.
5
Connect the replicator to a power source.
Advertisement
Table of Contents
