Using a hot key to select the power usage mode
1
Press
pop-up window.
2
While continuing to press
desired power usage mode.
3
Release the
The computer is now in the selected mode.
Changing the main battery
When your main battery has run out of power, you have two
options: plug in the AC Adapter or install a fresh main
battery.
Removing the battery from the computer
1
Save your work.
2
Power off the computer or place it in Hibernation mode
according to the instructions in
page
3
Remove all cables connected to the computer.
4
Close the display panel and turn the computer upside
down with the front of the computer facing you.
and
simultaneously to display the power usage
Fn
F2
key.
Fn
When handling battery packs, do not drop or knock them.
Also, be careful not to damage the casing or short-circuit the
terminals.
TECHNICAL NOTE: To avoid losing any data, save your files
and then either completely shut down your computer, or put it
into Hibernation mode before changing the main battery.
108.
Mobile Computing
Changing the main battery
, press
Fn
"Using Hibernation" on
125
until you select the
F2