Sound System Problems - Toshiba 4010 User Manual

216
If Something Goes Wrong
Resolving a hardware conflict
You press the CD-ROM or DVD-ROM eject button, but
the CD-ROM or DVD-ROM tray doesn't slide out.
Make sure the computer is connected to a power source and
turned on. The CD-ROM or DVD-ROM drive eject
mechanism requires power to operate.
If you need to remove a disc and cannot turn on the computer
(for example, if the battery is completely discharged), use a
narrow object, such as a straightened paper clip, to press the
manual eject button. This button is in the small hole next to
the CD-ROM or DVD-ROM eject button on the face of the
CD-ROM/DVD-ROM tray.
Some discs run correctly but others do not.
Check the type of disc you are using. The DVD-ROM drive
supports the Digital Versatile Disc (DVD) formats DVD-
ROM, DVD-R (read-only), plus CD-ROM, CD-R (read-
only), and CD-RW (read-only). The CD-ROM drive supports
CD-ROM, CD-R (read-only), and CD-RW (read-only).
HINT: The DVD-ROM drive is initially set for Region 1 (North
America) DVDs. You can change this setting (refer to
general properties" on page
of times.
If the problem is with a data CD or DVD, refer to the
software's documentation and check that the hardware
configuration meets the program's needs.
The disc will not come out of the drive when you click
the eject button on the screen.
Press the button on the CD-ROM or DVD-ROM drive itself.

Sound system problems

You do not hear any sound from the computer.
Adjust the volume control.
159), but only a very limited number
"Setting