Table of Contents
Advertisement
1. Introduction
Dear customer,
Thank you for purchasing this product.
This product meets the requirements of current European and national guidelines.
We kindly request the user to follow the operating instructions to preserve this condition and to ensure safe operation!
This user manual is part of the product. It contains important information on starting up and handling the device. Bear this in mind if you pass this
product to a third party.
For this reason, keep these operating instructions for future reference!
All names of companies and products are the trademarks of the respective owners. All rights reserved.
If there are any technical questions, please contact:
International:
www.conrad.com/contact
United Kingdom:
www.conrad-electronic.co.uk/contact
2. Explanation of symbols
An exclamation mark in a triangle indicates important instructions in this operating manual which must be adhered to.
The arrow symbol indicates specific tips and advice on operation.
3. Intended Use
The "Hexapod Robobug" complete set is solely designed for training, research and private use in the hobby or model construction area and the operating times
associated with it.
The product is not a toy and should be kept out of reach of children under 14 years of age.
The product is aimed at advanced users who already have experience with Arduino and the programming language C/C ++ and also in electronics as well as
in the construction of mechanical kits.
The product must not get damp or wet! The electronics are designed for operation at an ambient temperature between 0 °C and +40 °C. The electronics are
designed for use in a wide range of applications.
Observe all the safety instructions in these operating instructions. They contain important information regarding the handling of the product. You are the sole
responsible for the safe operation of the Hexapod Robobug complete set!
Mechanical components as well as servo motors are subject to natural wear and can wear during long operating times. The servos can be reordered as spare
parts. The servo motors have a high cycle stability of up to 100,000 cycles. However, the Robobug is not designed to carry out permanent movements. The
motors in the servo require a break of at least 10 minutes after a longer run (about 10 minutes of continuous movement) in order to cool down. This ensures
a long service life.
If you use the product for other purposes than those described above, the product may be damaged. Moreover, improper use involves risks such as short-
circuits, fire, electric shocks, etc. Please read the operating instructions carefully and do not discard them. Please include these operating instructions when
you pass the product on to a third party.
4
Advertisement
Table of Contents
