Barco E2 Gen 2 Quick Start Manual page 3

Event Master Cards
Caution: Cards are not hot-swappable.
Expansion
Cards
Expansion Cards
– 2 high-speed CXP connectors
– Up to 12 10-Gbit channels
Tri-Combo Input Cards and
Output Cards
– 1 DP 1.2 connector
– Formats up to 4096x2160@60
(30 bits)
– 4K/UHD supported
– HDCP 1.3 & EDID 1.3
– 1 HDMI 2.0 connector
– Formats up to 2560x1600@60
and 3840x1200@60 (30 bits)
– 4K/UHD supported
– HDCP 1.4 and 2.2 compatible
– EDID 1.3
– 4 SDI BNC connectors
– SD/HD/12G formats
Important Notes:
– All Gen 2 input and output cards each support two 4K/UHD signals.
– Input connectors have an LED that turns green when a valid sync has been
detected.
– Card configurations vary based on model; your configuration may be di erent.
– E2 Gen 2 power supplies (red handle) are not backward compatible with
E2 Gen 1 or S3 power supplies (black handle).
Input Cards
Quad Channel DisplayPort Input Cards
and Output Cards
– DisplayPort 1.2 specification
– 4K/UHD supported
– Formats up to 4096x2160@60 (30 bits)
– EDID 1.4 compatible
– HDCP 1.3 on all connectors
HDMI 2.0 Input Cards and
Output Cards (including MVR)
– HDMI 2.0 specification
– 4K/UHD supported
– Up to UHD@60p 4:2:2 12 bit
– 4 high-speed (Dual Link Type) inputs
or 2 UHD@60p inputs per card
– HDCP 1.x or HDCP 2.2
– HDCP 2.2 only when an HDCP 2.2
compliant signal chain is present
– Custom EDID
– User selectable bit depth
and color space
Output Cards MVR
Page 3 of 8