Honda SC65 Installation, Maintenance & Operation Manual page 94

Tire Puncture u Removing Wheels
3. Adjust the drive chain.
4. Install the rear axle nut/washer and
tighten the rear axle nut.
Torque: 83 lbf·ft (113 N·m, 11.5 kgf·m).
5. After installing the wheel, apply the brake
pedal several times, then recheck the disc
for caliper holder to disc clearance. Do not
operate the motorcycle without adequate
clearance.
If a torque wrench is not used for installation,
see your dealer as soon as possible to verify
proper assembly.
Improper assembly may lead to loss of
braking capacity.
92
P. 71
2