Honda SC65 Installation, Maintenance & Operation Manual page 93

6. Remove the brake caliper bracket and
rear wheel, side collars.
u Support the brake caliper assembly so
that it doesn't hang from the brake
hose. Do not twist the brake hose.
u Avoid getting grease, oil, or dirt on
the disc or pad surfaces.
u Do not push the brake pedal while the
brake caliper is removed.
Installation
1. To install the rear wheel, reverse the
removal procedure.
u Take care to prevent the brake caliper
from scratching the wheel during
installation.
NOTICE
When installing the brake calipers into position,
carefully fit the brake disc between the pads to
avoid scratching them.
Tire Puncture
2. Make sure that the lug on the swingarm is
located in the slot on the brake caliper
bracket.
Brake caliper
bracket
Swingarm
u Removing Wheels
Lug Slot
continued 91