Honda SC65 Installation, Maintenance & Operation Manual page 88

Tire Puncture u Removing Wheels
(CB1100A)
When removing and installing the wheel, be
careful not to damage the wheel speed
sensor and pulser ring.
❙
Front Wheel
Removal
1. Park your motorcycle on its center stand
on a firm, level surface.
2. Cover both sides of the front wheel and
brake caliper with protective tape or cloth.
Brake
caliper
Protective
tape
86
3. On the right side, remove the mounting
4. On the left side, remove the mounting
Mounting
bolts
Pulser ring
Wheel speed
sensor
bolts and remove the brake caliper.
bolts and remove the brake caliper.
u Support the brake caliper assembly so
that it doesn't hang from the brake
hose. Do not twist the brake hose.
u Avoid getting grease, oil, or dirt on
the disc or pad surfaces.
u Do not pull the brake lever (CB1100A:
the brake lever and brake pedal) while
the brake caliper is removed.
u Take care to prevent the brake caliper
from scratching the wheel during
removal.