How To Set Current Time; How To Set Or Cancel Voice Guide Function - Cuckoo CRP-HN10 Fuzzy Series Operating Instructions Manual

HOW TO SET CURRENT TIME / HOW TO SET OR

How to set current time

ex)8:25am now
1 Press mode button once.
It can be operated by pressing mode button for more than 1sec
Current time mode press yes button" after setting current time with
selection button.
Menu/Selection button blinks and Mode, Set and Cancel buttons turn ON.
Colon mark(:) on the sec. screen is blinging once per second.
2 set o'clock and minutes as pressing menuselection button.
1 min up " " button
1 min down " " button
10 min up or down " ", " " keep pressing.
Careful of setting am,pm.
In case of 12:00 it is 12:00 pm.
3 When finishing to set time you want, press "Set" button.
Set button blinks and Mode, Menu/Selection and Cancel buttons turn ON.
If it is over 7sec without yes button, setting time will be canceled with
voice,"it is canceled due to overtime".
About Lithium battery
This product contains lithium battery for improving blackout
compensation and time. Lithium battery lasts for 3 years.
When current time is not displayed on the screen, it means the
battery is exhausted. It should be replaced.
What is blackout compensation
This product remembers and maintains previous condition and
processes. After finishing blackout, it operates immediately.
If blackout happens during cooking, the cooking time will be
delayed depending on blackout time.
If the rice became cold because of blackout, warming will be
cancelled.
Voice guide volume control (The function which can control volume and cancel)
To enter this function, press Mode button 2 times. Mode button needs to be pressed for over 1 second at the first time.
CANCEL VOICE GUIDE FUNCTION
'3' sign is displayed when entered volume control mode by
pressing Mode button 2 times.
Menu/Selection button blinks and Mode, Set and Cancel buttons turn ON.
If set value became '0' by pressing button, voice guide
function is off.
Press button to set '5', that is the maximum volume sound. When
finish setting desired volume, press Mode button to store.
Set button blinks and Mode, Menu/Selection and Cancel buttons turn ON.
Keep the button pressed, and the button will turn to Continuous.
Set to desired voice volume, and press Set button.
<Standby mode>
How to set current time during keep
warming mode
1. Press Cancel button to cancel keep warm and
then press Mode button over 1 time to set
current time.
2. After setting time, press keep warm button to
re-start keep warm.