Cuckoo CRP-HN10 Fuzzy Series Operating Instructions Manual page 28

TO KEEP COOKED RICE WARM AND TASTY
Controlling method of warming temperature
If the temperature in the oven is not proper, it smells bad and changes rice color even though it is cleaned
frequently and boiled up. Temperature needs to be set.
Press "Mode" button over
1 time during warming. It displays
as picture with buzzer. At the
time, means current warming
temperature.
Change of temperature
If you want to change cooking temperature in the standby mode, press "Menu/selection" button over
2 seconds, and press it 2 more times. You can change cooking temperature.
How to operate My Mode function.
Use it while opening the lid when there is too much water or rice becomes too soft.
In standby mode, push the
"mode" button 4times.
The voice says that it is
programmed warming mode,
control the temperature you
want.
1. If too much water is spilled out when you open the lid :
2. If the edge of rice is too soft :
To raise temperature
To lower temperature
Note: The reference temperature programmed when the
product is shipped may differ from the Instruction.
Press "Menu/Selection" button to reduce the setting mode.
Press "Hour/up" button to change
the temperature as
"Set" button will blink, and "Mode", "Menu/Selection" and
"Cancel " buttons will be turned ON.
To switch the functions continuously, keep pressing the button.
After setting temperature, press "Mode"
select button. Preset temperature will be
stored with buzzer sound.
(It will be cancelled once press "Cancel"
button or after 7 seconds without
pressing any button.)
Press "Minute/Down" button to
change the temperature as
"Set" button will blink, and "Mode", "Menu/Selection" and "Cancel "
buttons will be turned ON.
To switch the functions continuously, keep pressing the button.
Press "Menu/selection" button
to change as the picture(up)
"Set" button will blink, and "Mode", "Menu/Selection" and
"Cancel " buttons will be turned ON.
To switch the functions continuously, keep pressing the button.
Select the menu you want, then the press the
"My Mode" button and set-up time will be
automatically entered with a buzzer. (If you press
the "Cancel" button or do not press a button
within 7 seconds, the function will be cancelled
and returned to standby mode.)
Press "Menu/choice" button
as the picture(down)
"Set" button will blink, and "Mode", "Menu/Selection" and
"Cancel " buttons will be turned ON.
To switch the functions continuously, keep pressing the button.
Press "Menu/Selection" button to raise the setting mode.