Cuckoo CRP-HN10 Fuzzy Series Operating Instructions Manual page 11

Electric pressure rice cooker/warmer
Hide thumbs Also See for CRP-HN10 Fuzzy Series:
Table of Contents

Advertisement

If the valve hole of the pressure weight part is clogged, punch it with the cleaning pin
The valve hole of the pressure weight allowing the escape of steam should be checked regularly to
ensure that it is not blocked.
If you use the valve hole of pressure weight as it is blocked, the hot steam or any hot content within the
cooker can cause injury.
Do not use a Cleaning Pin for other use except cleaning the valve hole of the pressure weight.
How to
disassemble the
pressure weight
How to clean the soft steam cap
Do not touch the surface of the soft steam cap right after cooking. You can get burned.
Detach the soft
Press the hook in the back, and follow the arrow to
steam cap like the
detach and clean. Make sure you clean frequently
picture.
with a sponge or a neutral detergent.
How to clean dew dish
Separate dew
Separate the drain
ditch cap by
dish.
pushing it down.
How to use cleaning pin and brush kit
Separate cleaning pin
Attached on the bottom of the
unit from main body as shown
in picture
Cautions when top cover does not close perfectly
Do not try to close the top cover by force. It can cause problems.
1. Check the inner pot correctly put in the
main body.
2. To close the top cover, the handle must
be located at "Unlock" as shown by the
picture on the right.
After the Lock/Unlock handle is locked(located on "Lock") turn the pressure weight counter-
clockwise while pulling it up, and pull it out.
Punch the clogged valve hole with the cleaning pin and reassemble it by turning it clockwise.
When the pressure weight is properly assembled, it can freely be turned.
neutral
detergent
Clean the drain
ditch cap and dew
dish with a neutral
detergent.
Separate cover as
Use brush kit. you
the arrow points.
can easily clean a
drain use the ditch
cap and tough
part to clean.
HOW TO CLEAN
Pressure Weight
Cleaning Pin
Attached on the
botton of the unit.
Soft steam cap
Assemble the vent
so that it fits into
the groove
perfectly.
Clean the drain
ditch cap with
brush kit.
When using
cleaning pin, pull
out cleaning pin
and make it meet
at right angles.
3. If there are hot things in the inner
pot, the top cover would not be
closed. At the time twist the
pressure weight and let the steam
out and then close the top cover.
Alien
Substance
After you attach the soft steam
cap to fit into the groove, press
'A'part firmly to assemble the
soft steam cap into the product.
Securely put in the
dew dish after
cleaning.
Only use for the
valve hole of the
pressure weight.

Advertisement

Table of Contents
loading

Table of Contents