Advertisement
- Handle the CD by the edges or the center hole. Do not touch the surface of the CD.
- To remove dust or fingerprints, wipe the CD from the center to the edge with a soft, lint-free cloth.
- Do not write on the surface.
- Do not place the CD in direct sunlight.
- Do not use commercial cleaners to clean the CD.
- Do not bend the CD.
- Loading a CD
To load a CD into a drive in a horizontal bay :
1. Press the Eject/Load button. The tray slides out of the drive.
2. Place the CD in the tray with the label facing up.
3. Close the tray by pressing the Eject/Load button, or by gently pushing the tray in.
Attention: Do not force the tray to open; do not insert foreign objects into the CD tray. If you have mounted
your CD-ROM drive in a vertical bay, consult the following illustration to determine which kind of loading tray
your drive has.
- If it looks like the figure on the left, go to Securing a CD in a Tray with Rotating Clips.
- If it looks like the figure in the middle, go to Securing a CD in a Tray with a Metal Rod.
- If it looks like the figure on the right, go to Securing a CD in a Tray with Pullout Clips.
Advertisement
