Table of Contents
Advertisement
Preparing the Engine
1.
Drain the engine oil from the oil pan and install
the drain plug.
2.
Remove and discard the oil filter. Install a new
oil filter.
3.
Refill the oil pan with designated quantity of
motor oil.
4.
Start the engine and run it at idle speed for
approximately 2 minutes.
5.
Shut off the engine.
6.
Thoroughly drain all fuel from the fuel tank, lines,
and the fuel filter/water separator assembly.
7.
Flush the fuel tank with fresh, clean diesel fuel.
8.
Secure all fuel system fittings.
9.
Thoroughly clean and service the air-cleaner
assembly.
10.
Seal the air-cleaner inlet and the exhaust outlet
with weatherproof tape.
11.
Check the antifreeze protection and add
antifreeze as needed for the expected minimum
temperature in your area.
52
Advertisement
Table of Contents
