Toro CT2240 Operator's Manual page 16

Ignition Key
0 = Engine off
I = Engine run/Auxiliary on
II = Engine pre-heat
III = Engine start
CAUTION
If you leave the key in the ignition switch,
someone could accidently start the engine
and seriously injure you or other bystanders.
Remove the key from the ignition.
Figure 18
1. Ignition switch
Engine Pre-Heat Indicator Light
Turn the ignition key to position II. The engine preheat
indicator light will illuminate and heat the glow plugs
(Figure 19).
Important:
Attempting to start a cold engine
before using the pre-heat can cause unnecessary
wear to the battery.
Figure 19
1. Engine pre-heat indicator light
Fuel Gauge
The fuel gauge shows the amount of fuel in the tank
(Figure 20).
Hour Meter
The hour meter shows the total hours that the machine
has been operated
g014556
1. Hour meter
Transmission Neutral Indicator
Light
This light illuminates when the travel control pedal is
in the neutral position and the ignition key is turned
to position I (Figure
Note:
The parking brake must be engaged for the
transmission neutral indicator light to illuminate.
g014557
1. Transmission neutral indicator light
16
Figure 20
(Figure 21).
Figure 21
22).
Figure 22
g014558
g014559
g014560