Figure 52
1. Engine cover
2. Oil cooler release clip
5.
Clean the screen thoroughly with compressed
air.
6.
Pivot the latch inward to release the oil cooler
(Figure
53).
Figure 53
1. Oil cooler
7.
Working from the fan side of the radiator,
blow out debris with low-pressure (50 psi)
compressed air (do not use water). Repeat the
step from the front of the radiator and again from
the fan side. Thoroughly clean both sides of the
oil cooler.
8.
After the radiator and oil coolers are thoroughly
cleaned, clean out any debris that may have
g018023
3. Oil cooler
g003974
2. Oil cooler latch
collected on other parts of the machine
54) with compressed air.
1. Radiator
9.
Pivot the oil cooler back into position and secure
the latch.
10.
Close the engine cover and secure the latch.
45
Figure 54
(Figure
g004137