4
Interface Applications
This chapter describes the hardware interfaces of UMTS<E EVB, shown as follows:
Power interface
UMTS<E TE-A interface
Wi-Fi & Ethernet TE-A interface
USB interface
Audio interfaces
(U)SIM interface
SD card interface
UART interfaces
It also provides information about the buttons, switch, status indication LEDs and test points to help
customers use the UMTS<E EVB.
4.1. Power Interface (J201/J801)
The UMTS<E EVB can be powered by an external power adapter through connecting with the power
jack (J201) or USB receptacle (J801) on the EVB. The power adapter connects to a step-down converter
which can provide the supply voltage (VBAT) required for operating the EVB and the module.
The following two figures show the simplified power supply schematic and the power interface of Quectel
UMTS<E EVB.
J801
USB
interface
J201
Power
supply
UMTS<E_EVB_User_Guide
U301
LDO
S201
U303
LDO
Power
U201
switch
TPS54319
Step-down converter
Figure 5: Power Supply for UMTS<E EVB
UMTS/HSPA/LTE Module Series
UMTS<E EVB User Guide
1.8V
Power supply for
Wi-Fi module
3.3V
2.85V
U302
LDO
J103
VBAT
Power supply for
SD Card
Power supply for
UMTS<E module
17 / 44