Val Controls IDC24-A User Manual page 71

No. 43 Reference SOT start
Description A reference SOT was started.
No. 44 Reference SOT finished
Description A reference SOT finished
No. 45 SOT aborted by operator
Description A SOT was aborted by the operator
No. 46 Reference SOT aborted by operator
Description A reference SOT was aborted by the operator
No. 51 Operational
Description The IDC was set in operational mode
No. 52 Fail position remote
Description The IDC was set in fail position mode
No. 57 Set in local mode
Description The IDC was set in local mode
No. 58 Set in remote mode
Description The IDC was set in remote mode
No. 61 Auto calibration was started
Description An auto calibration was started
No. 62 Auto calibration finished
Description An auto calibration finished
No. 63 Auto calibration aborted
Description An auto calibration was aborted
Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600
DID-UM-002
Revision: 10 vc@valcontrols.com • www.valcontrols.com
71/74