Atlas Copco GA 7 VSD+ Instruction Book page 33

Instruction book
This bar shows the text that corresponds to the selected icon.
• Section D shows the Action buttons. These buttons are used:
• To call up or program settings
• To reset a motor overload, service message or emergency stop
• To have access to all data collected by the regulator
The function of the buttons depends on the displayed menu. The most common functions are:
Designation
Menu
Modify
Reset
To activate an action button, highlight the button by using the Scroll keys and press the Enter key.
To go back to the previous menu, press the Escape key.
Chart views
Instead of viewing values, it is also possible to view a graph of one of the input signals (see section
menu) in function of the time.
When Chart (High Resolution) is selected, the chart shows the variation of the selected input (in this case
the pressure) per minute. Also the instantaneous value is displayed. The screen shows the last 4 minutes.
The switch button (icon) for selecting other screens is changed into a small Chart and is highlighted
(active).
2920 7109 23
Function
To go to the menu
To modify programmable settings
To reset a timer or message
Inputs
31