Operation Instructions Please read carefully before attempting to use this appliance. Step 1. Carefully unpack and clean grill plates with mild soap then sponge clean with cold water. Step. 2. Place in location where it will be used allowing for clearances per the dimensions indicated.
Clean Cycle 275°F is the factory default temp for the CLEAN cycle. To change the CLEAN cycle temp, simultaneously hold down the TEMP and CLEAN buttons for 15 seconds. Using the up or down arrows to adjust to the desired temp. To start a clean cycle, push CLEAN button once so the CLEAN LED light is turned on.
Page 4
Operating Instructions: 1. Press desired time to start the time cycle. After the cycle is finished, press it again to reset the time cycle 2. If for any reason the timer has to be reset in the middle of a cycle, you must press and hold the corresponding timer button for 3 seconds.
Page 5
Instruction’s for Adjusting the Temperature PRESS and hold the TEMP and ARROW up buttons simultaneously for 15 seconds. The current temperature setting will display on the right digital display only. Using the ARROW buttons, you may now adjust the temperature to your desired setting.
Page 8
PARTS LIST FOR MODEL CSD1212 ITEM MODEL DESCRIPTION MODEL CSD1212A QTY. CSD1212DTA BASE FRAME ASSEMBLY PG115100 PG115100 FEET, RUBBER 3/4 11016546469 11016546469 POWER CORD, 120 VOLTS 1101217174 1101217174 LOWER PLATEN, INSULATION 11018344019 11018344019 LOWER PLATEN INSULATION COVER 11018344018 11018344018 SCREW, SET 3/8-16X 1-1/2 SST3816112 SST3816112 WASHER SAE 3/8 WSAE38...
Page 9
PARTS LIST FOR MODEL CSD1212 SCREW, SET KNURKED CUP POINT 5/16-18 X 3/8 SST5161838KN SST5161838KN RING RETAINING 3/8 11017088867 11017088867 PLUNGER ASSEMBLY 110115544 110115544 SPRING, DETENT 110115555 110115555 TUBING-PAD 110115531 110115531 SCREW, SET 3/8-16 x 1.00 SST38161 SST38161 SCREW, SET 3/8-16 X 1/2 SST381612 SST381612 COLLAR CAM 110115530...
Exclusions: 1. WOOD / GAS FIRED OVENS: PROLUXE warranty applies to the main body of the oven being steel / refractory and insulation shall be free from defects in materials and workmanship for a period of four years from the date of purchase. The gas equipment shall be free from defects in materials and workmanship for a period of one (1) year from the date of purchase.
Need help?
Do you have a question about the ProGrill CSD1212 Series and is the answer not in the manual?
Questions and answers