AT&T TL86103 Quick Start Manual page 18

Initial basic settings
Add a Bluetooth
Note: Your TL86103 is compatible with Bluetooth version 2.0 or above devices.
To use a Bluetooth enabled cellular phone or headset with your telephone, you
must first pair and connect your Bluetooth cellular phone or headset with the
telephone base.
Bluetooth wireless technology operates within a short range (up to 30 feet). Keep
the connected device within 15 feet of the telephone base for optimal performance.
To pair and connect a cell phone using the telephone base:
MENU -> Press q/p to Bluetooth -> Press SELECT.
1. Press
SELECT
2. Press
SELECT
3. Press
4. Disconnect the cell phone from any Bluetooth device -> Press NEXT.
5. Place the cell phone next to the telephone base.
NEXT
6. Press to turn on the telephone base discoverable mode.
7. Turn on the Bluetooth feature of your cell phone and search for or
add new devices. Once your cell phone finds your AT&T phone
(AT&T DECT 6.0), press the appropriate key on your cell phone to
continue the pairing process.
Enter the cell phone passcode (typically 0000), if required -> SET.
f
Enter the PIN (default PIN: 0000) of the telephone base into your
f
cell phone, if required.
To pair and connect a headset using the telephone base:
MENU -> Press q/p to Bluetooth -> Press SELECT.
1. Press
SELECT
2. Press
3. Press q/p to Add headset -> Press SELECT.
4. Disconnect your headset from any Bluetooth device -> Press NEXT.
5. Set your headset to discoverable mode -> Press NEXT.
6. Press q/p to choose your headset, if required -> Press SELECT.
Enter the PIN (typically 0000) of your headset, if required, and
f
press NEXT.
cell phone/headset
®
to select Add device.
to select Add cellular.
to select Add device.
16