Troubleshooting - Progress PV1540 User Manual

32 progress
Cleaning the filters
B A
A1
A2
Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
External cleaning
Clean the appliance with a moist soft cloth.

TROUBLESHOOTING

The appliance does not start or it stops
during operation.
Before you contact the Service, refer to the
information that follows for a solution to the
problem.
1. Turn the filter (A) counterclockwise and
C
remove it.
2. To disassemble the filter (A), pull apart
(A1) and (A2).
3. Remove the filter (B).
4. Wash the filters with water.
5. Before you put the filter (B) back, make
sure that there are no residues of food
or soil in or around the edge of the
sump.
6. Make sure that the filter (B) is correctly
positioned under the 2 guides (C).
7. Assemble the filter (A) and put it back
in filter (B). Turn it clockwise until it
locks.
An incorrect position of the filters can
cause bad washing results and dam-
age to the appliance.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.
With some problems, the end indicator
flashes intermittently to show an alarm
code.