Table of Contents
Advertisement
3. To install the spray arm back, press it
downwards.
12. TROUBLESHOOTING
WARNING!
Improper repair of the appliance may
pose a danger to the safety of the user.
Any repairs must be performed by
qualified personnel.
The majority of problems that can occur
can be solved without the need to contact
an Authorised Service Centre.
Problem and alarm code
You cannot activate the appliance.
The programme does not start.
The appliance does not fill with water.
•
The indicator
tently.
•
Acoustic signal sounds 1 time intermit‐
tently.
18
ENGLISH
flashes 1 time intermit‐
11.6 Cleaning the upper spray arm
Do not remove the upper spray arm. If the
openings in the spray arm are clogged,
remove the remaining particles of soil with a
thin pointed object, e.g. a toothpick.
Refer to the below table for information on
possible problems.
With some problems, the dedicated indicator
flashes intermittently to indicate a malfunction
and the alarm code.
Possible cause and solution
•
Make sure that the mains plug is connected to the mains
socket.
•
Make sure that there is no damaged fuse in the fuse
box.
•
Make sure that the appliance door is closed.
•
The appliance recharges the resin inside the water soft‐
ener. The duration of the procedure is approximately 5
minutes.
•
Make sure that the water tap is open.
•
Make sure that the pressure of the water supply is not
too low. For this information, contact your local water
authority.
•
Make sure that the water tap is not clogged.
•
Make sure that the filter in the inlet hose is not clogged.
•
Make sure that the inlet hose has no kinks or bends.
Advertisement
Table of Contents
