Accessing The Hood; Removing The Bench Cushion - Toro Workman GTX Series Operator's Manual

Figure 22
1. Rear lifting points

Accessing the Hood

Raising the Hood
1. Lift up the handle of the rubber latches on each
side of the hood
Figure 23
2. Raise the hood.
Closing the Hood
1. Gently lower the hood.
2. Secure the hood by aligning the rubber latches
onto the latch anchors on each side of the hood
(Figure 23).
(Figure 23).
Removing the Bench
Cushion
1. Push the bench cushion forward to the raised
position.
2. Slide the cushion to the side, out of the pins, and
lift the cushion upward
g034044
g034045
29
(Figure 24).
Figure 24
g237191