Attaching The Pump And Cylinder Assembly - Toro 686 Operator's Manual

4
Attaching the Pump and
Cylinder Assembly
Model 44856
Parts needed for this procedure:
1 Pump and cylinder assembly
2 Screw (3/8 x 1-1/4 inch)
2 Washer (3/8 inch)
2 Locknut (3/8 inch)
1 Screw (1/2 x 1-1/4 inch)
1 Nut (1/2 inch)
1 Lock washer (1/2 inch)
1 Vibration strap
2 Cylinder pin
2 Hairpin cotter pin (large)
Procedure
Note:
Do not kink or pinch the hydraulic hose.
Align the pump and cylinder assembly and secure
them as shown in Figure
Figure 8
9.
g216321
1. Washer (3/8 inch)
2. Screw (3/8 x 1-1/4 inch)
3. Hairpin cotter (large)
4. Cylinder pin
5. Screw (1/2 x 1-1/4 inch)
8
Figure 9
6. Nut (1/2 inch)
7. Lock washer (1/2 inch)
8. Vibration strap
9. Locknut (3/8 inch)
g216317
g216318