Table of Contents
Advertisement
Product Overview
Specifications
Frame
Aerating wheels
Shaft
Tines
Bearings
Transport tires (Model 44856
only)
Hitch
Lift mechanism (Model 44856
only)
Springs
Aerating swath
Pattern
Operating speed
Overall width
Weight
Welded tubular steel; divided
into 3 sections, each section
moves horizontally and
diagonally to follow contour,
spring loaded
12 castings, 70 lb, 4 per
section, with permanent roll
pin every other hole
1-1/4 inch, machined to 1 inch
96, 8 per wheel, secured with
1 bolt, roll pin in wheel secures
second hole in tine; 1/2 or 3/4
inch open or closed, 4 inch
slicing blades are available
Self sealed, self aligned
4.80 x 8 — 2 ply
Drop pin (Model 44856)
3 point—Category 1 tractor
type (Model 44867)
Hand hydraulic pump to a 10
inch stroke cylinder. Hydraulic
fluid required is Mobil DTE 15
M or equivalent
6 to assist down pressure on
tines
2 m (78 inches)
15 cm (6 inches) on center
1 to 16 km/h (1 to 10 mph),
depending on conditions
2.2 m (90 inches) (Model
44856)
2 m (82 inches) (Model 44867)
674 kg (1,485 lb) (Model
44856)
569 kg (1,255 lb) (Model
44867)
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
9
Advertisement
Table of Contents
