Table of Contents
Advertisement
1. New
2. Badly worn but usable
Always clean cores out of the tines before storage.
Cores left in tines for extended periods can cause
pitting on the inside of the tine which keep the core
from ejecting.
Figure 30
3. Worn and
unusable—replace
Storage
1.
Raise the tines.
2.
Stop the traction unit, shut off the engine,
engage the parking brake, and remove the key.
3.
Remove dirt and debris from the entire aerator.
Clean the cores out of the tines.
Important:
mild detergent and water. Do not pressure
wash the aerator.
4.
Lubricate the aerator; refer to
14).
5.
Check the condition of the tines. Replace any
broken or worn tines.
6.
Check and tighten all bolts, nuts, and screws.
g029056
Repair or replace any part that is damaged.
7.
Paint all scratched or bare metal surfaces. Paint
is available from your authorized Service dealer.
8.
Store the aerator in a clean, dry garage or
storage area.
9.
Cover the aerator to protect it and keep it clean.
17
You can wash the aerator with
Lubrication (page
Advertisement
Table of Contents
