Calling for
All keypads have three pairs of emergency keys. Using these keys you can send an immedi-
Help
ate Fire, Auxiliary or Panic message to your central station.
Press both
alarm on the system.
Press both
Press both
IMPORTANT:The Fire, Auxiliary and Panic keys will NOT function unless
turned ON by the installer. If your installer has turned these keys ON, and
enabled audible feedback, holding down the keys for two seconds will
cause the keypad sounder to beep indicating that the alarm input has been
accepted and transmission to the central station is underway.
14
keys for two seconds to send a Fire message, and to trigger a fire
keys for two seconds to send an Auxiliary message.
keys for two seconds to send a Panic message.
Need help?
Do you have a question about the Security System Power 864 and is the answer not in the manual?
Questions and answers