Stability Ratings; Safety And Instructional Decals - Toro 23135 Operator's Manual

Stability ratings

To determine the degree of slope you can traverse with the
attachment installed on a traction unit, find the stability rating
for the hill position you want to travel in the appropriate
table below, then find the degree of slope for the same rating
and hill position in the Stability Data section of the Operator's
Manual for the traction unit.
Note: If you have a traction unit other than a TX series
traction unit, do not use the counterweight with the breaker
or the traction unit will be less stable in the front and side
uphill positions.
WARNING
Exceeding the maximum slope can cause the
traction unit to tip, crushing you or bystanders.
Do not drive the traction unit on a slope steeper
than the maximum slope.
Orientation
Front Uphill
Rear Uphill
Side Uphill
Stability Rating
D
D
C
Safety and Instructional
Decals
Safety decals and instructions are easily
visible to the operator and are located near
any area of potential danger. Replace any
decal that is damaged or lost.
1. Wear hearing protection.
2. Wear eye protection.
1. Lubrication point
1. Warning
2. Read the Operator's
Manual.
4
104-6150
3. Wear respiratory
protection.
4. Read the Operator's
Manual.
104-6151
106-7665
3. Maximum pressure—32
bar (475 psi)