Table Of Contents - Toro 23135 Operator's Manual

WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
Introduction
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
safety and operation training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers
of your product ready. The model and serial numbers are
located on a plate on the breaker frame. Write the numbers
in the space provided.
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
1. Safety alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
Contents
Safety ........................................................................... 3
© 2015-The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
(Figure
Figure 1
Stability ratings........................................................ 4
Safety and Instructional Decals ................................. 4
Setup ............................................................................ 5
Installing the Bit...................................................... 5
Operation ..................................................................... 6
Converting the Breaker for Vertical Surfaces................ 6
Breaking a Vertical Surface........................................ 6
Selecting a Tool ....................................................... 6
Specifications.......................................................... 7
Operating Tips ....................................................... 7
Maintenance .................................................................. 8
Recommended Maintenance Schedule(s) ....................... 8
Greasing the Bit ...................................................... 8
Charging the Nitrogen ............................................. 9
Storage ......................................................................... 9
Troubleshooting ...........................................................10
1),
2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved