Stability Ratings; Safety And Instructional Decals - Toro 22438 Operator's Manual

Stability Ratings

To determine the degree of slope you can traverse with the
attachment installed on a traction unit, find the stability rating
for the hill position you want to travel in the appropriate table
below, then find the degree of slope for the same rating and
hill position in the Stability Data section of the traction unit
Operator's Manual.
WARNING
Exceeding the maximum recommended slope
can cause the traction unit to tip, crushing you or
bystanders.
Do not drive the traction unit on a slope steeper
than the maximum recommended slope, as
determined in the following tables and the traction
unit Operator's Manual .
Important: If your traction has wheels, use the
counterweight on the platform while using the
attachment, or the traction unit will become unstable.
Orientation
Front Uphill
Rear Uphill
Side Uphill
Stability Rating
D
B
B
Safety and Instructional
Decals
Safety decals and instructions are easily
visible to the operator and are located near
any area of potential danger. Replace any
decal that is damaged or lost.
1. Crushing hazard of
hand—keep bystanders
a safe distance from the
machine.
1. Tipping hazard—maximum load capacity is 100 kg (220
lb) when transporting.
4
100–4650
2. Crushing hazard of
foot—keep bystanders
a safe distance from the
machine.
100–4690