Checking Total Memory - Toshiba Qosmio X300 Series User Manual

4
5
6
7
8

Checking total memory

When you add or remove a memory module, you can check that the
computer has recognized the change. To do this:
1
2
If the computer does not recognize the memory configuration, turn
off the computer and remove the memory module slot cover
(complete steps
and then check that the module is inserted completely into the
socket and lined up squarely with the socket latches.
NOTE
Downloaded from LpManual.com Manuals
Replace the memory module slot cover and secure it using the
screw.
Re-insert the main battery. For more information on inserting
the main battery, see
Turn the computer right side up.
Reconnect the cables.
Restart the computer.
TECHNICAL NOTE: You must have at least one memory module
installed for the computer to work.
Click Start, Control Panel, System and Maintenance, and
then System.
The System window appears.
The total memory is displayed below the System heading
under Memory (RAM).
1-8 in
From time to time, Windows
®
"Windows needs your permission to continue." This is a security
feature to prevent programs or people from doing things on your
computer without your permission. If you were trying to perform the
action, click Continue; otherwise, click Cancel. If unsure, cancel and
try again.
Adding memory (optional)
"Inserting a charged battery" on page
"Installing a memory module" on page
®
will display a pop-up that says,
Getting Started
59
118.
52),