Toshiba 2800-S201 User Manual page 52

Getting Started
Using the computer for the first time
Using a PS/2 mouse with the AccuPoint II
To set up a PS/2 mouse to work simultaneously with the
AccuPoint II pointing device:
1 Click Start, point to Settings, then click Control Panel.
2 Double-click Toshiba HWSetup, then select the
Pointing Devices tab.
3 Under Pointing Devices, select Simultaneous.
This option configures both the AccuPoint II pointing
device and the PS/2 mouse to work at the same time.
You must restart the computer for the setting to take
effect.
TECHNICAL NOTE: The system cannot detect a PS/2 mouse
if you connect it after you start the computer.
4 Click OK, then click Yes to restart the computer.
Part I: Getting to Know Your Computer
52