Removing A Memory Module; Connecting A Mouse - Toshiba 2800-S201 User Manual

Getting Started
Setting up your computer

Removing a memory module

1 Follow steps 1 through 5 in
(optional)
2 Gently pull up on the module to disconnect it, then
gently pull it out of the slot.
3 Complete the procedure by following steps 9 through
11.

Connecting a mouse

You may want to use a mouse instead of the computer's
built-in pointing device. A USB mouse disables the
AccuPoint II pointing device. With a PS/2 mouse, you can
choose to have the
AccuPoint II pointing device active at the same time.
Connecting a USB mouse
To connect a USB mouse, plug the mouse cable into one of
the USB ports.
Connecting a PS/2 mouse
CAUTION: The computer must be turned off. Connecting a
PS/2 mouse with the computer's power on may damage the
mouse, the computer, or both.
To connect a PS/2 mouse, plug the mouse cable into the
PS/2 port.
By default, the system configures the PS/2 mouse to work
when it is connected at power on, or the AccuPoint II
pointing device to work otherwise.
on page 36.
Part I: Getting to Know Your Computer
Installing additional memory
39