Getting Started
Setting up your computer
8
Gently press down on the memory module connector
until the clips snap into place.
Do not force the module into position. The memory
module should be level when secured in place.
Inserting the memory module
CAUTION: Avoid touching the connectors on the memory
module or on the computer. Grease or dust on the
connectors may cause memory access problems.
9
Replace the memory slot cover.
10
Replace the screws and tighten them.
11
Turn the computer over and reconnect any cables you
removed.
When you turn on your computer, it automatically
recognizes the additional memory. If the computer does
not recognize the memory, shut down the computer,
remove the memory slot cover, and make sure the
memory module is seated properly, as described in step
7.
Part I: Getting to Know Your Computer
38