If Something Goes Wrong
Fixing device-related problems
To remove the cap:
1
Firmly grasp the cap and pull it straight up.
Removing the AccuPoint II cap
2
After cleaning the cap, position it on the peg and press it
into place.
NOTE: The peg is square, so be careful to align the cap' s
hole with the peg.
Display problems
Here are some typical display problems and their solutions:
The display is blank.
Display Auto Off may have gone into effect. Press any key
to activate the screen.
You may have activated the instant password feature by
pressing
password, press
no password is registered, press
reactivates and allows you to continue working.
and
simultaneously. If you have registered a
Fn
F1
, type the password and press
Enter
. The screen
Enter
Part II: Technical Reference
218
. If
Enter