GW Instek MFG-2000 Series Quick Start Manual
  1. Manuals
  2. Brands
  3. GW Instek Manuals
  4. Portable Generator
  5. MFG-2000 Series
  6. Quick start manual

GW Instek MFG-2000 Series Quick Start Manual

Multi-channel function generator
Hide thumbs Also See for MFG-2000 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Multi-Channel Function Generator
MFG-2220HM
QUICK START GUIDE
GW INSTEK PART NO. 82MF-222HMM01
ISO-9001 CERTIFIED MANUFACTURER

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MFG-2000 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for GW Instek MFG-2000 Series

Summary of Contents for GW Instek MFG-2000 Series

  • Page 1 Multi-Channel Function Generator MFG-2220HM QUICK START GUIDE GW INSTEK PART NO. 82MF-222HMM01 ISO-9001 CERTIFIED MANUFACTURER...
  • Page 2 This manual contains proprietary information, which is protected by copyright. All rights are reserved. No part of this manual may be photocopied, reproduced or translated to another language without prior written consent of Good Will Corporation. The information in this manual was correct at the time of printing. However, Good Will continues to improve its products and therefore reserves the right to change the specifications, equipment, and maintenance procedures at any time without notice.

  • Page 3: Table Of Contents

    Table of Contents Table of Contents SAFETY INSTRUCTIONS ........4 GETTING STARTED ......... 9 Main Features ..............9 Panel Overview ..............11 Setting Up the function Generator........17 QUICK REFERENCE ........19 How to use the Digital Inputs ........... 21 How to use the Help Menu ..........

  • Page 4: Safety Instructions

    MFG-2000 Series User Manual AFETY INSTRUCTIONS This chapter contains important safety instructions that should be followed when operating and storing the function generator. Read the following before any operation to ensure your safety and to keep the function generator in the best condition.
  • Page 5 SAFETY INSTRUCTIONS DANGER Hot Surface Double Insulated Do not dispose electronic equipment as unsorted municipal waste. Please use a separate collection facility or contact the supplier from which this instrument was purchased. Safety Guidelines Do not place heavy objects on the instrument. General Guideline ...
  • Page 6 MFG-2000 Series User Manual AC Input voltage: 100 ~ 240V AC, 50 ~ 60Hz. Power Supply  Connect the protective grounding conductor of  WARNING the AC power cord to an earth ground to prevent electric shock. Fuse type: T0.5A/250V...
  • Page 7 SAFETY INSTRUCTIONS (Pollution Degree) EN 61010-1:2010(Third Edition)specifies pollution degrees and their requirements as follows. The function generator falls under degree 2. Pollution refers to “addition of foreign matter, solid, liquid, or gaseous (ionized gases), that may produce a reduction of dielectric strength or surface resistivity”.
  • Page 8 MFG-2000 Series User Manual Power cord for the United Kingdom When using the function generator in the United Kingdom, make sure the power cord meets the following safety instructions. NOTE: This lead/appliance must only be wired by competent persons WARNING: THIS APPLIANCE MUST BE EARTHED...

  • Page 9: Getting Started

    GETTING STARTED ETTING STARTED The Getting started chapter introduces the function generator’s main features, appearance, set up procedure and power-up. Main Features DDS Function Generator series Performance  1μHz high frequency resolution maintained at full  range 20ppm frequency stability ...
  • Page 10 MFG-2000 Series User Manual modulation Burst function with internal and external triggers  Pulse waveform with configurable rise times & fall  times Store/recall 10 groups of setting memories  Output overload protection  USB interface as standard, LAN interface Interface ...

  • Page 11: Panel Overview

    GETTING STARTED Panel Overview MFG-2220HM Front Panel                                      ...
  • Page 12 MFG-2000 Series User Manual The UTIL key is used to  access the save and recall options, update and view the firmware version, access the calibration options, system setting, Dual channel functions and frequency meter. ARB is used to set the ...
  • Page 13 GETTING STARTED The scroll wheel is used to Scroll Wheel edit values and parameters. Decrease Increase The digital keypad is used to Keypad    enter values and parameters.    The keypad is often used in conjunction with the arrow ...
  • Page 14                      MFG-2000 Series User Manual                ...
  • Page 15 GETTING STARTED         External trigger input. Used to CH1/CH2 receive external trigger signals.. Trigger Frequency counter input. Counter Input               ...
  • Page 16 MFG-2000 Series User Manual Display The Parameter display and edit window. Parameter Windows Displays the current channel and setting status. Status Tabs Waveform Display Used to display the waveform The function keys (F1~F6) under the LCD display Soft Menu Keys...

  • Page 17: Setting Up The Function Generator

    GETTING STARTED Setting Up the function Generator This section describes how to adjust the handle Background and power up the function generator. Pull out the handle Adjusting the sideways and rotate Handle Place the MFG- 2220HM horizontally, Or tilt the stand. Place the handle vertically to hand carry.
  • Page 18 MFG-2000 Series User Manual 2. Turn on the power switch on the front panel. 3. When the power switch is turned on the screen displays the loading screen.            ...

  • Page 19: Quick Reference

    QUICK REFERENCE UICK REFERENCE This chapter describes the operation shortcuts, built-in help and factory default settings. This chapter is to be used as a quick reference, for detailed explanations on parameters, settings and limitations, please see the operation chapters. How to use the Digital Inputs ........... 21 How to use the Help Menu ..........
  • Page 20 MFG-2000 Series User Manual Save ......................46 Recall ......................46 Menu Tree ................. 47 Waveform ....................48 Waveform_More ..................49 ARB-Display ....................50 ARB-Edit ....................51 ARB- Built In ..................... 52 ARB-Save ....................53 ARB-Load ....................54 ARB-Output ....................54 MOD_(CH1/CH2) ...................

  • Page 21: How To Use The Digital Inputs

    QUICK REFERENCE How to use the Digital Inputs The MFG-2220HM has three main types of digital Background inputs: the number pad, arrow keys and scroll wheel. The following instructions will show you how to use the digital inputs to edit parameters. 1.

  • Page 22: How To Use The Help Menu

    MFG-2000 Series User Manual How to use the Help Menu Every key and function has a detailed description Background in the help menu. 1. Press UTIL  2. Press System (F4)  3. Press Help (F3)   4. Use the scroll wheel to navigate to a help item.
  • Page 23 QUICK REFERENCE Sweep Function Provides help on the Sweep function. Burst Function Provides help on the Burst function. DSO Link Provides help on DSO link. Hardcopy Explains how to use the Hardcopy function. 5. For example, select item 5 to see help on the sweep functions.
  • Page 24 MFG-2000 Series User Manual 6. Use the scroll wheel to navigate the help information. 7. Press Return to return to the previous menu.

  • Page 25: Selecting A Waveform

    QUICK REFERENCE Selecting a Waveform Square Wave Example: Square wave, 3Vpp, 75% duty cycle, 1kHz. 1. Press Waveform and Output: qa     select Square (F2). 2. Press Duty (F1), 7 + 5    + %(F5). ...

  • Page 26: Sine Wave

    MFG-2000 Series User Manual 4. Press the AMPL key V   then 5 +VPP (F6). 5. Press the Output key. Sine Wave Example: Sine Wave, 10Vpp,100kHz 1. Press the Waveform Output:      key and select Sine (F1).
  • Page 27 QUICK REFERENCE    2. Press Total (F1), a  E followed by 3 + Enter (F1).    3. Press Type (F2), ALL   Input: N/A (F3). 4. Press Order (F3). d 5. Press Order (F1), d...

  • Page 28: Modulation

    MFG-2000 Series User Manual Modulation AM Modulation Example: AM modulation. 100Hz modulating square wave. 1kHz Sine wave carrier. 80% modulation depth. Press the MOD key and Output:      select AM (F1). 1. Press Waveform and ...
  • Page 29 QUICK REFERENCE 9. Press the Output key.

  • Page 30: Ask Modulation

    MFG-2000 Series User Manual ASK Modulation Example: ASK modulation. 50% duty cycle. 1kHz sine carrier wave. 10Hz rate . Internal source. 1. Press MOD and then Output:  K     select More(F6) and then press F2(ASK). 2. Press Waveform and ...
  • Page 31 QUICK REFERENCE 9. Press the Output key.

  • Page 32: Fm Modulation

    MFG-2000 Series User Manual FM Modulation Example: FM modulation. 100Hz modulating square wave. 1kHz Sine wave carrier. 100 Hz frequency deviation. Internal Source. 1. Press the MOD key Output:      and select FM (F2). 2. Press Waveform and ...

  • Page 33: Fsk Modulation

    QUICK REFERENCE 10. Press the Output key. FSK Modulation Example: FSK modulation. 100Hz Hop frequency. 1kHz Carrier wave. Sine wave. 10 Hz Rate. Internal Source. 1. Press the MOD key Output: K     and select FSK (F3). 2.

  • Page 34: Pm Modulation

    MFG-2000 Series User Manual 9. Press the output key. PM Modulation Example: PM modulation. 800Hz sinusoidal carrier wave. 15 kHz modulating sine wave. 180˚ phase deviation. Internal Source. 1. Press Waveform and Output:      select Sine (F1).

  • Page 35: Psk Modulation

    QUICK REFERENCE 9. Press MOD, PM (F4),    Source (F1), INT (F1).  10. Press the Output key. PSK Modulation Example: PSK modulation. 50˚ phase deviation. 1kHz sine carrier wave. 10Hz PSK rate. Internal source. 1. Press MOD and select Output ...

  • Page 36: Pwm Modulation

    MFG-2000 Series User Manual 7. Press 5+ 0 +  g Degree(F1) 8. Press MOD, More  K  (F6) first then   PSK(F3), Source (F1), INT (F1) 9. Press the Output key PWM Modulation Example: PWM modulation. 800Hz carrier, 15kHz modulated sine wave.

  • Page 37: Sum Modulation

    QUICK REFERENCE 6. Press 1 + 5+ kHz (F3).   kz 7. Press MOD, select    More (F6) first then  PWM(F1),Duty(F2) 8. Press 5 + 0 + % (F1) 9. Press MOD,    More(F6), PWM(F1) ...
  • Page 38 MFG-2000 Series User Manual 5. Press the MOD key  q  and select SUM (F5), SUM Freq (F3). 6. Press 1 + 0 + 0 + Hz    z (F2). 7. Press the MOD key  ...

  • Page 39: Sweep

    QUICK REFERENCE Sweep Example: Frequency Sweep. Start Frequency 10mHz, Stop frequency 1MHz. Log sweep, 1 second sweep, Marker Frequency 550 Hz, Manual Trigger. 1. Press Sweep, Start Output: a     (F3). 2. Press 1 + 0 + mHz ...
  • Page 40 MFG-2000 Series User Manual 11. Press Sweep, Source  aa  (F1), Manual (F3), gg Trigger (F1).

  • Page 41: Burst

    QUICK REFERENCE Burst Example: Burst Mode, N-Cycle (Internally triggered), 1kHz burst frequency, Burst count = 5, 10 ms Burst period, 0˚ burst phase, Internal trigger, 10 us delay, rising edge trigger out 1. Press FREQ/Rate 1 Output:    ...
  • Page 42 MFG-2000 Series User Manual 11. Press Burst, N Cycle    (F1), TRIG setup (F5),    TRIG out (F5), ON/OFF (F3), Rise (F1). 12. Press the Output key.

  • Page 43: Arb

    QUICK REFERENCE ARB–Add Built-In Waveform Example: ARB Mode, Exponential Rise. Start 0, Length 100, Scale 327. 1. Press ARB, Built in Output: B av     (F3), Wave (F4), ah  Math(F2), use the scroll wheel to select Exporise and then ...

  • Page 44: Arb- Add Line

    MFG-2000 Series User Manual 3. Press Data (F2),    aa 3+0+0, Enter (F5).  ARB- Add Line Example: ARB Mode, Add line, Address:Data (10:30, 50:100) 1. Press ARB, Edit (F2), Output: Ed      Line (F2), Start ADD a...
  • Page 45 QUICK REFERENCE    2. Press Start (F1), 0 + a  E Enter (F5), Return.     3. Press Length (F2), 1 +    gh 0 + 0, Enter (F5), Return.  E ...

  • Page 46: Utility Menu

    MFG-2000 Series User Manual Utility Menu Save Example: Save to Memory file #5. 1. Press UTIL, Memory    (F1), Store (F1). 2. Choose a setting using the scroll wheel     and press Done (F5). Recall Example: Recall Memory file #5.

  • Page 47: Menu Tree

    QUICK REFERENCE Menu Tree Conventions Use the menu trees as a handy reference for the function generator functions and properties. The MFG-2220HM menu system is arranged in a hierarchical tree. Each hierarchical level can be navigated with the operation or soft menu keys. Pressing the Return key will return you to the previous menu level.

  • Page 48: Waveform

    MFG-2000 Series User Manual Waveform Waveform Sine Square Triangle Pulse Ramp More Width Duty nSEC uSEC Return Return mSEC Return...

  • Page 49: Waveform_More

    QUICK REFERENCE Waveform_More More Noise Harmonic Total Enter Return Type Even User Return Order Order Enter Return Ampl mVPP Return Phase Degree Return Return Display Freq Time Return Return...

  • Page 50: Arb-Display

    MFG-2000 Series User Manual ARB-Display Display Horizon Vertical Next Page Back Page Overview Return Start Clear Clear Enter Enter Return Return Length High Clear Clear Enter Enter Return Return Zoom In Zoom In Zoom out Zoom Out Return Return...

  • Page 51: Arb-Edit

    QUICK REFERENCE ARB-Edit Edit Point Line Copy Clear Protect Return Address Start ADD Start Start Clear Clear Clear Clear Done Enter Enter Enter Enter Start Return Return Return Return Clear Data Start Data Length Length Enter Clear Clear Clear Clear Return Enter Enter...

  • Page 52: Arb- Built In

    MFG-2000 Series User Manual ARB- Built In...

  • Page 53: Arb-Save

    QUICK REFERENCE ARB-Save Save Start Length Memory Return Clear Clear Select Select Enter Enter Return Return Return New Folder Enter char Back Space Save Return New File Enter char Back Space Save Return...

  • Page 54: Arb-Load

    MFG-2000 Series User Manual ARB-Load  Load Memory Done Return Select Select Return Return ARB-Output Output Start Length Marker Return Clear Clear Start Enter Enter Length Return Return Return...

  • Page 55: Mod_(Ch1/Ch2)

    QUICK REFERENCE MOD_(CH1/CH2) More Source Source Source Source Source Return Return Return Return Return AM Depth Freq Dev Hop Freq PM Dev Sum Ampl Return Return Return Return Return FSK Rate Sum Freq MOD Time MOD Time MOD Time uSEC uSEC uSEC mSEC...

  • Page 56: Mod_More(Ch1/Ch2)

    MFG-2000 Series User Manual MOD_More(CH1/CH2) More Source Source Source Return Return Return Duty Psk phase ASK Ampl Degree mVpp Return Return Return Pwm Freq Ask Rate Psk Rate Return Return Return Return Return Return...

  • Page 57: Sweep

    QUICK REFERENCE SWEEP  Source Type Start Stop SWP Time More mSEC Linear Span Return Return Return Return Return Center Manual Trigger Return Return Return Marker Freq Return ON/OFF Return Return...

  • Page 58: Burst- N Cycle

    MFG-2000 Series User Manual Burst- N Cycle  N Cycle Cycles Infinite Phase Period Return TRIG Setup Clear Clear uSEC Degree mSEC Return Return Return Rise Fall Return Manual Trigger Return Delay nSEC uSEC mSEC Return TRIG out Rise Fall...

  • Page 59: Burst - Gate

    QUICK REFERENCE Burst – Gate Burst Gate Polarity Phase Return Clear Degree Return Return...

  • Page 60: Util

    MFG-2000 Series User Manual UTIL UNIL Memory Interface Cal. System Dual Ch. Counter Store Self Test HardCopy Freq Cpl State Done Return Return Offset Return Ratio Enter Return Recall Solfware Language Ampl Cpl Gate Time English 0.01sec Done Version 中文...
  • Page 61 QUICK REFERENCE Remote Config Done Return DHCP Auto IP Manual Ip Addr Done Clear Return NetMask Done Clear Return GateWay Done Clear Return Done Return HostName Enter Char Clear Return Done Return...
  • Page 62 MFG-2000 Series User Manual More Power On Dislight Sync Out Return Clk Source Last Default Middle CH1 Marker Return High Return Return CH2 Marker Return...

  • Page 63: Ch1/Ch2

    QUICK REFERENCE CH1/CH2 CH1/CH2 Load Phase DSO Link 50 OHM 0 Phase Search High Z Sync Int Return Degree Return Return...

  • Page 64: Pulse

    MFG-2000 Series User Manual Pulse Pulse Load Phase 50 OHM 0 Phase High Z Degree Return Return...

  • Page 65: Default Settings

    QUICK REFERENCE Default Settings The Preset key is used to restore the default panel  settings. Function Sine Wave Output Settings Frequency 1kHz Amplitude 3.000 Vpp Offset 0.00V dc Output units Output terminal 50Ω Modulation (AM/ASK/FM/FS K/PM/PSK/SUM) Carrier wave 1kHz sine wave Modulation wave 100Hz sine wave AM depth...
  • Page 66 MFG-2000 Series User Manual PWM duty cycle Modem status Start/Stop frequency 100Hz/1kHz Sweep Sweep time Sweep type Linear Sweep status Burst frequency 1kHz Burst Ncycle Burst period 10ms Burst starting phase 0˚ Burst status Power off signal System Settings Display mode...

  • Page 67: Mfg-2220Hm Series Specifications

    QUICK REFERENCE MFG-2220HM Series Specifications The specifications apply when the function generator is powered on for at least 30 minutes under +18° C~+28° C. CH1/ CH2 Arbitrary ARB function Built-in Functions Sample Rate 500 MSa/s Repetition Rate 125MHz Waveform Length 16k points Amplitude Resolution 14 bits...
  • Page 68 MFG-2000 Series User Manual (sinewave relative to 100 kHz,1Vpp ,into 50Ω) Units Vpp, Vrms, dBm Offset Range ±5 Vpk ac +dc (into 50Ω) ±10Vpk ac +dc (Open circuit) Accuracy 1% of setting + 5mV+ 0.5% of amplitude Waveform Output Impedance 50Ω...
  • Page 69 QUICK REFERENCE Frequency 1uHz~25MHz Pulse Width ≧10nS(limited by the current frequency setting) Variable duty Cycle 0.01%~99.99%(limited by the current frequency setting) Overshoot <5% Jitter 20ppm+500ps(4) AM Modulation Sine, Square, Triangle, Ramp, Carrier Waveforms Pulse,Arb Modulating Waveforms Sine, Square, Triangle,Upramp, Dnramp Modulating Frequency 2mHz to 50kHz (Int) DC to 50kHz (Ext)
  • Page 70 MFG-2000 Series User Manual SUM depth 0%~100.0% Source Internal / External Modulation Carrier Waveforms Pulse Modulating Sine, Square, Triangle, Waveforms Upramp, Dnramp 2mHz to 50kHz (Int) Modulation Frequency DC to 50kHz (Ext) Widh Depth 0%~100.0% Source Internal / External Carrier Waveforms...
  • Page 71 QUICK REFERENCE Trigger Single, External, Internal. Marker Marker signal on falling edge(programmable) Source Internal / External Burst Waveforms Sine, Square, Triangle, Ramp Frequency 1uHz~MaxFrequency Pulse count 1~1000000 Cycles or intfinite Start/ Stop Phase -360.0°~+360.0° Internal Frequency 1 us~500 s Gate source External Trigger Trigger Source Single, External, Internal.
  • Page 72 MFG-2000 Series User Manual Waveform Sine or square (50±5% duty) Reference Output Output Voltage 3.3 Vp-p square wave Output Impedance 50Ω, AC coupled Output Frequency 26.8436MHz Frequency Counter Range 5Hz to 150MHz Accuracy Time Base accuracy±1count Time Base ±20ppm (23˚C ±5˚C)
  • Page 73 QUICK REFERENCE Track CH2=CH1 Coupling Frequency(Ratio or Difference) Amplitude & DC Offset √ Dsolink 10 Groups of Setting Save/Recall Memories Interface LAN, USB 4.3’’ TFT LCD Display 480 × 3 (RGB) × 272 General Specifications Power Source AC100~240V, 50~60Hz Power Consumption 35W (Max) Operating Environment Temperature to satisfy the...

  • Page 74: Ec Declaration Of Conformity

    MFG-2000 Series User Manual EC Declaration of Conformity GOOD WILL INSTRUMENT CO., LTD. No.7-1, Jhongsing Rd., Tucheng Dist., New Taipei City 236, Taiwan GOOD WILL INSTRUMENT (SUZHOU) CO., LTD. No. 69, Lushan Road, Suzhou New District Jiangsu, China declares that the below mentioned product...

  • Page 75: Globl Headaqarters

    QUICK REFERENCE GLOBL HEADAQARTERS GOOD WILL INSTRUMENT CO., LTD. No. 7-1, Jhongsing Road, Tucheng Dist., New Taipei City 236, Taiwan Tel: +886-2-2268-0389 Fax: +866-2-2268-0639 Web: www.gwinstek.com Email: marketing@goodwill.com.tw GOOD WILL INSTRUMENT (SUZHOU) CO., LTD. No. 521, Zhujiang Road, Snd, Suzhou Jiangsu 215011, China Tel: +86-512-6661-7177 Fax: +86-512-6661-7277 Web:...

This manual is also suitable for:

Mfg-2220hmMfg-2160mfMfg-2160mrMfg-2120maMfg-2260mfaMfg-2260mra

Table of Contents