Cleaning And Care - Electrolux Master 9 Manual

5 Placing the jug/jar on base unit
EN
Blender and chopper -Place the jug on the base unit with the handle to the right. Rotate it clockwise
until it locks into position. (The jug can only be placed in one position, the handle facing you). Place
CNS
the ngredients in the jar.
Grinder – Hold the grinder blade assembly holder and place the assembled grinder on the base
unit. Rotate it clockwise until it locks into position.
CNT
The jar can only be placed in one position, make sure the locking symbol on the blade assembly
holder is facing you when positioning the jar.
KR
6 Start the blender – Press the On/offbutton. The icons will light up illuminating the display.
7 Choosing the right speed or program
ID
You have preset speeds 1-5, dedicated recipe programs– smoothie, Soup, Ice crush, and Pulse
mode to choose from. The selected speed or recipe program will light up. You can activate any
TH
speed by tapping on the speed setting and adjust the speed either by tapping a different speed,
or sliding your fingers on the speed bar. With Pulse mode you can give the ingredients a quick mix
to achieve your desired consistency. Press the Pulse icon to go into Pulse mode. The Pulse and the
VN
speed icons start blinking. Press 1 to 5 to pulse at different speeds. Press the Start recipe from App
icon if you would like to perform the program received from the app.
Recommended settings/ programs for the blender - Smoothie, Soup, Ice crush, Speeds (1-5), Pulse mode
Recommended settings/ programs for the chopper and grinder– Speeds (1-5), Pulse mode
IMPORTANT! Your blender is equipped with a dual safety system. The product will not start oper-
ating and the display will flash indicating that either the lid or the jug/jar is not placed into position.
This ensures that you don't run into nasty accidents in your kitchen.
WARNING! Never remove the measuring cup or the lid while running the product. Never run the
blender empty, running the blender empty can cause overheating and can damage the product.
Keep hands and utensils out of the blender jar while blending.
8 Stopping the product - The blender will operate until the program is finished. To stop any program
manually, press the Stop icon.
9 Cleaning after use – We recommend that you wash the components right after use in order to avoid
drying of food residue on components.
IMPORTANT! To avoid crazing of the jug/jar, always rinse the jug/jar with clean water directly after
use in order to prevent acids or essential oils decolouring the plastic material. Always rinse the jug/
jar clean even before placing it into the dishwasher. Fill the jug/jar with luke warm water, close the lid
and place the jug/jar on the base unit.
10 Cleaning speeds -Run speed 5 for 30 seconds on the blender and the grinder, run on speed 1 for the
chopper.
11 Unplug the appliance

CLEANING AND CARE

Thorough cleaning of the base unit and the interface -Turn the blender off and unplug the power cord.
Wipe the blender base with a damp cloth.
WARNING! Never immerse the base unit, plug, or cord in water or any other fluid.
Thorough cleaning of the jug/jar -Remove all components. Rinse the blades in water and detergent.
Note! The blender blade is not removable.
WARNING! Handle carefully, the blades are very sharp!
Enjoy your new Electrolux product!
DISPOSAL
This symbol on the product or on its packaging indicates that the product may not be treated
as householdwaste. To recycle your product, please take it to an official collection point or to
an Electrolux service center that can remove and recycle the battery and electric parts in a
safe and professional way. Follow your country's rules for the separate collection of electrical
products and rechargeable batteries.
Electrolux reserves the right to change products, information and specifications without notice.
10 www.electrolux.com