Overview; Introduction; Specification - Fibocom L850-GL Series Hardware Manual

2 Overview

2.1 Introduction

L850 is a highly integrated 4G WWAN module which uses M.2 form factor interface. It supports LTE
FDD/LTE TDD/WCDMA systems and can be applied to most cellular networks of mobile carrier in the
world.

2.2 Specification

Specification
Operating Band
GNSS
LTE
UMTS
Data Transmission
Power Supply
Temperature
Physical
characteristics
Reproduction forbidden without Fibocom Wireless Inc. written authorization - All Rights Reserved.
FIBOCOM L850-GL Series Hardware Guide
L850-GL-00, L850-GL-01,
L850-GL-02, L850-GL-03,
L850-GL-05, L850-GL-10
series (except L850-GL-
10-06)
L850-GL-12
L850-GL-20
L850-GL-10-06
Support GPS, GLONASS, BDS
3GPP Release 11
3GPP Release 8
LTE FDD
LTE TDD
UMTS/HSPA+
DC 3.135V~4.4V, Typical 3.3V
Normal operating temperature: -10°C~+55°C
Extended operating temperature: -20°C~+65°C
Storage temperature: -40°C~+85°C
Interface: M.2 Key-B
Dimension ： 30×42×2.3mm
Weight: About 6.2 g
LTE FDD: Band 1, 2, 3, 4, 5, 7, 8, 11, 12, 13, 17, 18,
19, 20, 21, 26, 28, 29, 30, 66
LTE TDD: Band 38, 39, 40, 41
WCDMA/HSPA+: Band 1, 2, 4, 5, 8
LTE FDD: Band 2, 4, 5, 13
450Mbps DL(Cat 9)/50Mbps UL(Cat 4)
347Mbps DL(Cat 9)/30Mbps UL(Cat 4)
When LTE TDD achieves maximum DL rate, its UL
rate can reach 10Mbps only
UMTS: 384 kbps DL/384 kbps UL
DC-HSPA+: 42Mbps DL(Cat 24)/5.76Mbps UL(Cat6)
Page 10 of 59